Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Mission District, CA
Chimney repair in Mission District usually means working on brick flues inside 1900s-1920s Edwardian and Victorian wood-frame buildings, where original terra cotta liners have cracked from a century of seismic settling and wet-season damp. We’re Chimney Sweep Berkeley, and we’ve served Mission District since 2015, handling everything from flue resurfacing to cap replacement on the tightly packed rowhouses that define the neighborhood. Call (855) 382-9432 when you need a straight answer about what’s actually wrong up there.
Why Mission District Homes Are Different
The Mission District’s chimney trade is shaped by its dense rows of early-1900s wood-frame row houses, where original brick chimneys serve fireplaces and furnaces under closely packed shared roofs and party walls. A sweep or repair here is as much about roof access, party-wall clearance, and earthquake-era masonry condition as it is about removing soot. Adjacent chimneys often share wall sections, which means a cracked flue tile in one unit can affect draft in the one next door. We’ve found flue tiles fractured by the 1906-era settlement and later seismic activity, plus decades of slow creosote buildup from moderate winter evening fires.
The Mission sits in a sheltered, sunny microclimate, warmer and drier than the foggy western neighborhoods. Fireplaces get moderate use on cool nights, so creosote accumulates steadily but not dramatically across the wet season. What does accumulate is moisture damage: damp winter air works into old mortar joints, and terra cotta liners that were already stressed by shifting foundations crack further. Homes in the 94110 ZIP carry these conditions block by block, from flat-roofed Edwardian rows near Valencia to the steeper Victorians on the eastern slope toward Potrero.
Roof access is the wildcard in Mission District. Many chimneys sit close to property lines, sometimes within a few feet of the neighbor’s roofline. On a shared party wall, that means coordinating ladder placement carefully and often walking a second roof to inspect the adjoining chimney face. We plan for this on every visit, because it changes how we stage equipment and how long a repair takes.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Mission District Services
The two services Mission District homeowners call about most are the annual sweep and dryer vent cleaning. Both address the leading fire hazards in these older wood-frame buildings, and both can be handled in a single appointment.
Chimney Sweep in Mission District
A chimney sweep in Mission District means removing creosote and soot from flues that have served these Edwardian and Victorian fireplaces for a century. We inspect the liner condition as we work, because in this neighborhood the sweep often reveals cracked terra cotta tiles or deteriorated mortar that needs repair. Many of our Mission District customers schedule this before the wet season starts, when damp air makes buildup stickier and harder to remove. Chimney Sweep in Mission District covers the full process, from roof access to inspection report.
Dryer Vent Cleaning in Mission District
Dryer vent cleaning in Mission District deals with lint-packed ducts that run through tight wall cavities and crawl spaces in these older multi-unit buildings. Lint accumulates faster here than in single-family suburban homes because many Mission District buildings have shared dryer exhaust runs that are longer and harder to access. We clean the entire run, not just the first few feet, and check the exterior termination cap where bird nests and debris often block airflow. Dryer Vent Cleaning in Mission District explains the full scope and what we typically find.
Chimney Repair in Mission District
Chimney repair in Mission District is driven by the age and construction of these 1900s-1920s Edwardian and Victorian wood-frame buildings. Original brick chimneys with terra cotta flue liners crack over time, and the Mission’s seismic history has accelerated that process on almost every block in 94110. We repair what’s actually broken, using professional-grade materials from HeatShield, Gelco, Olympia Chimney, and Famco, and we show you the camera footage before recommending anything. That’s the standard we hold for every repair, and it’s the same approach detailed on our Chimney Repair page.
Chimney Cap Installation
Signs you need it
You see water staining on the ceiling near the chimney, hear birds or animals in the flue, or notice rain dripping into the firebox after storms.
What it costs in Mission District
Chimney cap installation in Mission District typically runs $350-$550, with the final figure depending on flue size and roof access.
How we do it
We measure the flue opening, select a cap from Gelco or Olympia Chimney sized to the tile, secure it with a mechanical fastener, and verify the spark arrestor mesh meets code.
Chimney Liner Installation
Signs you need it
A camera inspection shows cracked or missing terra cotta tiles, or you smell smoke in rooms adjacent to the chimney even when the damper is closed.
What it costs in Mission District
Chimney liner installation in Mission District typically ranges from $2,500 to $3,500 for a standard one-story flue, with multi-story and complex configurations pushing higher.
How we do it
We run a camera through the flue to map the layout, then install a properly sized liner system through the existing clay tile or remove damaged sections and route it cleanly to the appliance.
Chimney Flashing Repair
Signs you need it
You see water staining on the ceiling near the roofline after rain, or the metal flashing around the chimney base is rusted, lifted, or pulling away from the brick.
What it costs in Mission District
Chimney flashing repair in Mission District typically ranges from $450 to $850, depending on whether we’re resealing existing metal or cutting and fitting new flashing.
How we do it
We inspect the existing flashing, remove the old sealant or damaged metal, install new step flashing that integrates with the roofline, and seal all transitions with a weatherproof compound.
Chimney Crown Repair
Signs you need it
The concrete crown on top of the chimney is cracked, spalled, or missing sections, letting water seep into the brick below.
What it costs in Mission District
Chimney crown repair in Mission District typically ranges from $500 to $900, including forming a new crown or sealing an existing one.
How we do it
We clean the damaged crown, form a new concrete surface with proper slope away from the flue, and seal it with a waterproof membrane so water sheds instead of soaking in.
What Chimney Repair Costs in Mission District
| Item | Typical range in Mission District |
|---|---|
| Chimney cap installation | $350-$550 |
| Chimney flashing repair | $450-$850 |
| Chimney crown repair | $500-$900 |
| Chimney liner installation | $2,500-$3,500 |
How long does chimney repair take in Mission District?
Most cap, flashing, and crown repairs finish in a single visit, usually 2 to 4 hours including roof access. Liner installations typically take a full day, sometimes two if the existing flue requires significant prep work. Call (855) 382-9432 for a schedule based on your specific chimney.
Do I need a permit for chimney repair in Mission District?
Most repairs that match existing components, like cap replacement or flashing reseal, do not require a permit in San Francisco. Liner installation or significant structural work may need one, and we’ll tell you before any work starts. Call (855) 382-9432 for a free estimate.
Brands We Service in Mission District
We work with HeatShield, Gelco, Olympia Chimney, and Famco, plus other professional-grade lines. Parts for common Mission District repairs are on hand, and special-order items usually arrive within a few days. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Mission District, CA
| Service | Typical range in Mission District |
|---|---|
| Chimney sweep | $175-$300 |
| Chimney cap installation | $350-$550 |
| Chimney cap replacement | $350-$550 |
| Chimney flashing repair | $450-$850 |
| Chimney crown repair | $500-$900 |
| Chimney liner installation | $2,500-$3,500 |
| Dryer vent cleaning | $150-$250 |
What pushes a Mission District quote higher is roof access, particularly on shared party walls where we need to set ladders carefully or walk an adjoining roof. We give a firm price before we start, so there’s no surprise upcharge when the job gets complicated.
Neighborhoods We Serve in Mission District
We cover the entire 94110 ZIP, from the flat streets west of Mission to the sloping blocks toward the eastern edge of the district. Response time for most estimates in Mission District is within a few business days, and repairs are scheduled on the first available visit.
- Inner Mission
- Mission Dolores
- Valencia Corridor
- Bernal Heights border
- Lower 24th Street corridor
Service Area – Cities Near Mission District
We also serve neighborhoods adjacent to Mission District, including Embarcadero, CA, Financial District, CA, Chinatown, CA, and Fisherman’s Wharf, CA. Each area has its own housing stock and access considerations, so call (855) 382-9432 if you’re nearby and want to confirm coverage.
Serving Mission District, CA – Our Local Coverage Area
We’re based in the Mission District area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Mission District
Most estimate visits in Mission District happen within a few business days, and we schedule repairs on the next available appointment after approval. We plan roof access ahead of time, especially on shared party walls, so the visit goes smoothly. Call (855) 382-9432 to check current scheduling.
Yes, many rowhouses have chimneys on shared walls or close to property lines, so we coordinate ladder placement carefully and sometimes need access to an adjoining roof. We handle this on every visit without you having to arrange anything with your neighbor.
Yes, we do chimney sweeping and dryer vent cleaning in one appointment, which saves Mission District homeowners from coordinating two separate contractors. We’ll confirm the scope when you call (855) 382-9432 and give you one firm price for the combined work.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mission District Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Ramon Castillo"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Eduardo Delgado"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Stephanie Miller